The soil density is a process of increasing soil density by reducing the distance between particles, resulting in a reduction in air volume: there is no significant change in the volume of water on the soil. Compaction rate is measured from the dry volume weight of the soil compacted. When water is added to the soil that is being compacted, the water will function as a lubricating element for soil particles. Due to the presence of water, these particles will more easily move and slide over each other and form a denser position.
It’s Extremely Important To Understand Soil Density
The addition of water content tends to decrease the dry volume weight of the soil. This is because the water then occupies the pore spaces in the soil which can be occupied by solid particles from the soil. The moisture content at which the maximum dry volume of the soil is reached is called the maximum moisture content. Meanwhile, if you need experts to help you determine the quality of the soil within your property, we suggest you hire a soil testing company.
Apart from moisture content, many other factors affect soil compaction, including soil type and compaction effort. Soil type is represented by the particle size distribution, the shape of the soil grains, the specific weight of the solid part of the soil. Also, the amount and type of clay minerals present in the soil have a major influence on the maximum dry volume weight value and the optimum moisture content of the soil. At lower water content the presence of capillary scorching stress on the soil pores prevents the tendency of soil particles to move freely to become denser. Then the capillary tension will decrease with increasing water content so that the particles become easy to move and become denser.
At this time, soil density must be considered very much because climate change and increasingly extreme weather can cause unwanted things, especially the more frequent rain than the heat makes the land easier to slip, if left alone it will seriously threaten the safety of the lives of the population, even more so. residents in hillside or mountain slopes, if the density of the soil is not monitored it will be very dangerous, especially with the deforestation, there is no water infiltration and no soil binding, which increases the chance of landslides in hilly areas.
Soil compaction test equipment is needed to monitor and prevent landslides in hills, soil test equipment or Soil Bearing Tester is a soil bearing capacity and quality of soil compaction, non-sub-alkaline cohesive, and pavement repair. This dynamic plate load tester is explained within the Engineering Code for rock and soil for the construction of the road. This principle was developed in early 1982 at the company before HMP GmbH and has been continuously optimized since then.
That’s it for the info regarding soil density that we might be able to share with you in this article. Although the information in this article is not that long, we do hope it helps you to understand the importance of soil density along with its test better, so you can make sure that your project can be done on strong and decent soil.
