Weight distribution hitch: A weight distribution hitch is a great option if you are towing heavy trailers. A weight distribution hitch transfers some of the extra tongue weight from your trailer to the front axle of your vehicle, resulting in a more level ride for both you and your trailer.
Reduces Trailer Sway
Table of Contents
A weight distribution hitch reduces trailer sway by shifting some of the tongue weight back onto the trailer’s tongue and then to its axle. This transfers more even weight throughout the entire rig system, improving contact with the road and providing better control over the tow vehicle.
If you are towing a trailer with no weight distribution hitch the tongue weight rests on the middle of the hitch. This is often called a “squat“. This causes the front axle of your tow vehicle to lift off the ground and affects your ability to control your braking force and traction.
A weight distribution hitch uses adjustable spring bars to shift 20%-30% of the tongue weight back to the trailer tongue. The remainder of the tongue weight is moved forward to the front axels of your truck and then to the axles of your trailer.
Reduces Tire Wear
Weight distribution hitches spread the trailer tongue’s weight evenly across both your vehicle’s front axle and the back axles of your trailer. You can tow your trailer higher by using this method.
Because the majority of trailer weight is carried by your vehicle’s back, tire wear will be reduced. The front of your vehicle is responsible for steering and braking, so if the weight of your trailer is too high in the rear, it can change the geometry of your front axle and cause you to lose control during hard braking.
Weight distribution hitches help prevent these problems by using adjustable spring bars to evenly distribute the trailer’s tongue weight on your vehicle’s back axle and on the back of your trailer’s axles. This helps ensure that your trailer and your vehicle ride level and reduces the sagging that causes so much tire wear.
Towing capacity increases
It is important to ensure that the tow vehicle can tow the trailer and all the people in it. Your vehicle’s Gross Vehicle Weight Rating (GVWR) reflects that.
The GVWR determines how your tow vehicle’s wheels, brake system, and steering abilities work together. Automakers can produce trucks and cars with pre-set towing capacities.
For those looking to improve their towing capability, a weight distribution hitch can be a good option. This distributes your load to the front axle, rather than the rear. It helps reduce sagging and reduces sway.
It also allows you to safely haul heavier loads than a standard hitch can handle. This can be a costly and complex task, but it is well worth it to increase your towing safety. This can help prolong the life of your trailer and lower repair costs.
Safety increases
A weight distribution hitch can be a good option for those who want to increase their safety when towing their trailer. They not only give you more control of your vehicle and trailer but also help to make the trip easier.
The best time to use a weight distribution hitch is when your trailer weighs more than 50% of the weight of your tow vehicle. Too much weight in the rear of your vehicle could cause problems and force it to the front.
It can cause swaying, loss of control and accidents. It can cause the vehicle to lose its balance and decrease your braking force.
